Reduce operating costs and boost productivity with the MV1200-R Advance Plus M800 Mitsubishi Wire EDM. Offering improved machine construction, auto-threading, internal machine communication and enhanced power supply technology, this high-tech wire EDM machine features the user-friendly Mitsubishi M800 series control with a 19-inch touchscreen and an ultra-durable, non-contact Cylindrical Drive System on the X, Y, U & V axis drives.



Machine Travels X x Y x Z: in (mm)
15.7 x 11.8 x 8.7 (400 x 300 x 220)
Maximum Workpiece Size W x D x H: in (mm)
31.9 x 27.6 x 8.5 (810 x 700 x 215)
Max. Submerged Workpiece Weight: lb (kg)
1102 (500)
Table Dimensions: in (mm)
25.2 x 17.7 (640 x 450)
U/V Travels (from center): in (mm)
±2.4 x ±2.4 (±60 x ±60)
Taper Angle @ Thickness: in (mm)
15 deg.@ 8.0 (15 deg.@ 200)
Wide Angle Taper (Optional Guides Required)
45 deg. @ 1.8" 45mm (No AT Possible)
Table Rapid Feed Speed: in/min (mm/min)
51.2 (1300)
Power Supply
Minimum Drive Unit / Resolution
0.000002 / 2 µin ( 0.00005 / 50nm)
User Program Storage [Hard Disk Size]
1 GB [32 GB CFAST Card Size]
Wire Diameter Possible: in (mm)
0.004~0.012 (0.1~0.3)
Minimum Start Hole Diameter: in (mm)
0.02 (0.5)
Max. Wire Spool size STD [optional]: lb (kg)
22 [44] (10 [20])
Filters / Type
2 pc. / Paper Cartridge
Filter Tank Capacity: gal (L)
145 (550)
Machine System Dimensions W x D: in (mm)
79.7 x 106.4 (2025 x 2702)
Machine Installed Height: in (mm)
79.3 (2015)
Machine System Weight: lb (kg)
5952 (2700)
Fluid System Weight: lb (kg)
Included with machine
Power Requirements [KVA]
200-230V [13.5] Built in AVR
Compressed Air Requirements
2.7 cu.ft./min. @ 71~100 psi
    • V350-V AEII Power Supply with Digital Spark Control
    • DMX-S (Digital Matrix Sensor) Shapes each spark reducing electrode wear
    • Non-contact, Zero Back-Lash Linear Shaft Drive System XY (UV-Z use ball screws)
    • All Fiber Optic servo control (4X faster internal communication speed)
    • Submerged Machining to 8.7″ Deep
    • Automatic Fluid Level Control
    • Manual Vertical Machine Tank door operation
    • Three Piece Hardened 3-Sided Stainless Work Table
    • Fine Grain “Dianite” Casting Material
    • Split Axis Construction (Table Moves in X, Column Moves in Y)
    • Windows 8 Embedded Operating System
    • CFAST Compact Flash Card memory with 1GB user program storage
    • Fully-Automatic Rough Machining Control covers PM, CM-R and EM functions
    • Program Input Methods: Keyboard, USB Flash Memory, and Ethernet with FTP standard
    • DC-Servo (Closed Loop) Torque Control Wire Tensioning System
    • Linear Motion Guide Ways
    • All-Axes Absolute Control System
    • Linear Glass Scale Feedback (X-Y- Axes)
    • Optical Rotary Encoder Feedback (UV-Z-Axis)
    • Scrap Wire Processor (Chopper) (Optional)
    • New 14″ AT Annealing Length Improves Threading Reliability
    • Inverter Controlled 16-Step Programmable Flushing
    • Full Time AEII (Anti-Electrolysis) Power Supply Protection
    • Dielectric Fluid Chiller Standard
    • Full 1-yr. Warranty with Triple Diamond Partnership Program
    • Special 10 Year Positioning Warranty (Covers the Cylindrical Drive System)
    • Remote 360 (Remote user monitoring, diagnostics & service support)
    • Preventative Maintenance (PM) Visit (to be used by end of 1st year)
    • Auto-Oiler Lubrication System

Want to learn more?

Click here to contact one of our experts who will gladly answer your questions and help you find the best option based on your needs.


Click here to request technical support, on-site service, training, or for purchasing replacement parts from our large inventory.