POST :
2194

		WP_Post Object
(
    [ID] => 2194
    [post_author] => 41
    [post_date] => 2020-03-04 11:45:35
    [post_date_gmt] => 2020-03-04 16:45:35
    [post_content] => Increase productivity with the best auto threading system on the market today: with an annealing length of over 21 inches, the MV2400-ST Advance Type M800 Wire EDM can submerge cut up to 16.5 inches deep and thread the maximum workpiece height, both at the start point and through the gap if needed for broken wire recovery. To this add Mitsubishi’s highly reliable non-contact Cylindrical Drive System and M800 series control with a 19-inch touchscreen for easy operation.

 
    [post_title] => MV2400-ST ADVANCE TYPE M800
    [post_excerpt] => 
    [post_status] => publish
    [comment_status] => closed
    [ping_status] => closed
    [post_password] => 
    [post_name] => mv2400-st-advance-type-m800
    [to_ping] => 
    [pinged] => 
    [post_modified] => 2023-04-06 15:22:55
    [post_modified_gmt] => 2023-04-06 19:22:55
    [post_content_filtered] => 
    [post_parent] => 0
    [guid] => https://spark-co.com/?post_type=machine&p=2194
    [menu_order] => 125
    [post_type] => machine
    [post_mime_type] => 
    [comment_count] => 0
    [filter] => raw
)

		Array
(
    [0] => EDM
)

MV2400-ST ADVANCE TYPE M800

Increase productivity with the best auto threading system on the market today: with an annealing length of over 21 inches, the MV2400-ST Advance Type M800 Wire EDM can submerge cut up to 16.5 inches deep and thread the maximum workpiece height, both at the start point and through the gap if needed for broken wire recovery. To this add Mitsubishi’s highly reliable non-contact Cylindrical Drive System and M800 series control with a 19-inch touchscreen for easy operation.

Specifications

Machine Travels X x Y x Z: in (mm)

23.6 x 15.7 x 16.5 (600 x 400 x 425)

Maximum Workpiece Size W x D x H: in (mm)

41.3 x 32.3 x 16.3 (1050 x 820 x 420)

Max. Submerged Workpiece Weight: lb (kg)

3300 (1500)

Table Dimensions: in (mm)

33.0 x 25.2 (840 x 640)

U/V Travels (from center): in (mm)

±3.0 x ±3.0 (±75 x ±75)

Taper Angle @ Thickness: in (mm)

15 deg.@ 10.2 (15 deg.@ 260)

Wide Angle Taper (Optional Guides Required)

45 deg. @ 2.4" 60mm (No AT Possible)

Table Rapid Feed Speed: in/min (mm/min)

51.2 (1300)

Power Supply

V350-V

Minimum Drive Unit / Resolution

0.000002 / 2 µin ( 0.00005 / 50nm)

User Program Storage [Hard Disk Size]

1 GB [80 GB]

Wire Diameter Possible: in (mm)

0.004~0.012 (0.1~0.3)

Minimum Start Hole Diameter: in (mm)

0.02 (0.5)

Max. Wire Spool size STD [optional]: lb (kg)

22 [44] (10 [20])

Filters / Type

2 pc. / Paper Cartridge

Filter Tank Capacity: gal (L)

260 (985)

Machine System Dimensions W x D: in (mm)

111.7 x 137.4 (2837 x 3490)

Machine Installed Height: in (mm)

93.7 (2380)

Machine System Weight: lb (kg)

9500 (4300)

Fluid System Weight: lb (kg)

880 (400)

Power Requirements [KVA]

200-230V [13.5] Built in AVR

Compressed Air Requirements

2.7 cu.ft./min. @ 71~100 psi

Overview/Features

- V350-V AEII Power Supply with Digital Spark Control
- DMX-S (Digital Matrix Sensor) Shapes each spark reducing electrode wear
- Non-contact, Zero Back-Lash Linear Shaft Drive System XY (UV-Z use ball screws)
- All Fiber Optic servo control (4X faster internal communication speed)
- Submerged Machining to 12.2″ Deep
- Automatic Fluid Level Control
- Automatic Vertical Machine Tank Door
- Three Piece Hardened 3-Sided Stainless Work Table
- Fine Grain “Dianite” Casting Material
- Fixed Table Traveling Column Construction (Column Moves in X & Y)
- Windows 8 Embedded Operating System
- CFAST Compact Flash Card memory with 1GB user program storage
- Fully-Automatic Rough Machining Control covers PM, CM-R and EM functions
- Program Input Methods: Keyboard, USB Flash Memory, and Ethernet with FTP standard
- DC-Servo (Closed Loop) Torque Control Wire Tensioning System
- Linear Motion Guide Ways
- All-Axes Absolute Control System
- Linear Glass Scale Feedback (X-Y Axes)
- Optical Rotary Encoder Feedback (UV-Z-Axis)
- Scrap Wire Processor (Chopper) (Optional)
- New 17″ AT Annealing Length Improves Threading Reliability
- Inverter Controlled 16-Step Programmable Flushing
- Full Time AEII (Anti-Electrolysis) Power Supply Protection
- Dielectric Fluid Chiller Standard
- Full 2-yr. Warranty with Triple Diamond Partnership Program
- Special 10 Year Positioning Warranty (Covers the Cylindrical Drive System)
- Remote 360 (Remote user monitoring, diagnostics & service support)
- Preventative Maintenance (PM) Visit (to be used by end of 1^st year)
- Auto-Oiler Lubrication System

Floorplan / Layout

Want to learn more?

Click here to contact one of our experts who will gladly answer your questions and help you find the best option based on your needs.

SERVICE AND SUPPORT

Click here to request technical support, on-site service, training, or for purchasing replacement parts from our large inventory.

MV2400-ST ADVANCE TYPE M800

Specifications

Overview/Features

Floorplan / Layout

Want to learn more?

SERVICE AND SUPPORT

Machines

SOFTWARES

Consumables

INDUSTRIES

Brands

CONTACT US

SERVICE

About us

PROMOTIONS

Legal Terms

Contact us :

© SPARK & CO. DISTRIBUTEUR DE SOLUTIONS DE DÉCOUPAGE AU JET D’EAU ET À L’ÉLECTROÉROSION