MV4800-S ADVANCE TYPE M800

The Mitsubishi MV4800-S Advance Type M800 Wire EDM  has added several new features such as a wide tank door window, a built in 55 lb. wire spool system and thermal Buster which is a thermal stability system that circulates chilled dielectric fluid to key areas throughout the machine structure. Other key machine features are the highly reliable non-contact cylindrical drive system and the new Mitsubishi M800 series control with a 19-inch cell phone like touchscreen—providing easier user interface than previous models. With advancements in machine construction and power supply technology, the Mitsubishi MV4800-S Advance Type M800 is sure to revolutionize Wire EDM machining and increase your shop’s productivity.

 

Specifications

Machine Travels X x Y x Z: in (mm)
31.5 x 23.6 x 20.1 (800 x 600 x 510)
Maximum Workpiece Size W x D x H: in (mm)
49.2 x 40.2 x 19.9 (1250 x 1020 x 505)
Max. Submerged Workpiece Weight: lb (kg)
6600 (3000)
Table Dimensions: in (mm)
42.5 x 34.3 (1080 x 870) w Back Rail
U/V Travels (from center): in (mm)
±4.0 x ±4.0 (±100 x ±100)
Taper Angle @ Thickness: in (mm)
15 deg.@ 14.3 (15 deg.@ 365)
Wide Angle Taper (Optional Guides Required)
45 deg. @ 3.2" (No AT Possible)
Table Rapid Feed Speed: in/min (mm/min)
51.2 (1300)
Power Supply
V350-V
Minimum Drive Unit / Resolution
0.00001 / 2 millionths (0.0001 / 0.05µm)
User Program Storage [Hard Disk Size]
1 GB [80 GB]
Wire Diameter Possible: in (mm)
0.006~0.012 (0.15~0.3)
Minimum Start Hole Diameter: in (mm)
0.02 (0.5)
Max. Wire Spool size STD [optional]: lb (kg)
22 / 55 (10 / 25)
Filters / Type
4 pc. / Paper Cartridge
Filter Tank Capacity: gal (L)
391 (1480)
Machine System Dimensions W x D: in (mm)
122.0 x 135.6 (3100 x 3445)
Machine Installed Height: in (mm)
110.8 (2815)
Machine System Weight: lb (kg)
13,007 (5900)
Fluid System Weight: lb (kg)
990 (450)
Power Requirements [KVA]
200-230V [13.5] Built in AVR
Compressed Air Requirements
2.7 cu.ft./min. @ 71~100 psi
    • V350-V AEII Power Supply with Digital Spark Control
    • DMX-S (Digital Matrix Sensor) Shapes each spark reducing electrode wear
    • Non-contact, Zero Back-Lash Linear Shaft Drive System XY (UV-Z use ball screws)
    • All Fiber Optic servo control (4X faster internal communication speed)
    • Submerged Machining to 20.0″ Deep
    • Automatic Fluid Level Control
    • Automatic Vertical Machine Tank Door with viewing window
    • Three Piece Hardened 3-Sided Stainless Work Table with a back support rail
    • Fine Grain “Dianite” Casting Material
    • Fixed Table Traveling Column Construction (Column Moves in X & Y)
    • New M800 Series Control with 19” cell phone like touch screen operation
    • Windows 8 Embedded Operating System
    • CFAST Compact Flash Card memory with 1GB user program storage
    • Fully-Automatic Rough Machining Control covers PM, CM-R and EM functions
    • Program Input Methods: Keyboard, USB Flash Memory, and Ethernet with FTP standard
    • 2D-CAM Onboard Programming allows DXF and IGES CAD files to be imported
    • Onboard Programming Macros allows for quick easy programing of common simple shapes
    • DC-Servo (Closed Loop) Torque Control Wire Tensioning System
    • Linear Motion Guide Ways
    • All-Axes Absolute Control System
    • Linear Glass Scale Feedback (X-Y Axes)
    • Optical Rotary Encoder Feedback (UV-Z-Axis)
    • ± 4” U-V Axis Travel provides higher taper angles in taller workpieces
    • AM (Angle Master) provides a higher degree of taper accuracy (requires AM guides and flush cups)
    • Automatic Wire Alignment uses a removable alignment block to square the wire to the table
    • Round diamond wire guides (easy screw-in type)
    • One-Touch Lever Lock Power Feeder System allows indexing the carbide in the middle of a job
    • Scrap Wire Processor (Chopper) (Standard)
    • 25Kg (55 lb.) built in wire spool capacity
    • New 27″ AT Annealing Length Improves Threading Reliability
    • Inverter Controlled 16-Step Programmable Flushing
    • Full-Time AEII (Anti-Electrolysis) Power Supply Protection
    • Thermal Buster thermal stabilization system
    • Dielectric Fluid Chiller Standard
    • Full 2-yr. Warranty with Triple Diamond Partnership Program
    • Special 10 Year Positioning Warranty (Covers the Cylindrical Drive System)
    • Remote 360 (Remote user monitoring, diagnostics & service support)
    • Preventative Maintenance (PM) Visit (to be used by end of 1st year)
    • Auto-Oiler Lubrication System

Want to learn more?

Click here to contact one of our experts who will gladly answer your questions and help you find the best option based on your needs.

SERVICE AND SUPPORT

Click here to request technical support, on-site service, training, or for purchasing replacement parts from our large inventory.