With machine performance up to 36 square inches per hour in hardened D2 steel, the FA40V Advance is one of the world’s fastest, large workpiece, high-accuracy wire EDM machines. The Mitsubishi FA40V Advance Wire EDM features the new Mitsubishi EDM M700 series control with a 15-inch touchscreen, providing easy user interface. The new features available with the FA40V Advance exemplify Mitsubishi’s continued dedication to high-precision, innovative machining and are sure to advance your shop’s production.



Machine Travels X x Y x Z: in (mm)
39.4 x 31.5 x 15.7 (1000 x 800 x 400)
Maximum Workpiece Dimensions: W x D x H in (mm)
61.0 x 51.2 x 15.6 (1550 x 1300 x 395)
Max. Submerged Workpiece Weight: lb (kg)
8818 (4000)
Table Dimensions: in (mm)
53.5 x 46.2 (1360 x 1175)
U/V Travels (from center): in (mm)
±3.0 x ±3.0 (±75 x ±75)
Taper Angle @ Thickness: in (mm)
15 deg.@ 10.5 (15 deg.@ 265)
Wide Angle Taper (Optional Guides Required)
45 deg. @ 2.4" (No AT Possible)
Table Rapid Feed Speed: in/min (mm/min)
51.2 (1300)
Power Supply
Minimum Drive Unit / Resolution
0.00001 / 2 millionths (0.0001 / 0.05µm)
User Program Storage [Hard Disk Size]
1 GB [80 GB]
Wire Diameter Possible: in (mm)
0.008~0.014 (0.2~0.36)
Minimum Start Hole Diameter: in (mm)
0.02 (0.5)
Max. Wire Spool size STD [optional]: lb (kg)
22 [44] (10 [20])
Filters / Type
4 / Paper
Filter Tank Capacity: gal (L)
640 (2420)
Machine System Dimensions: in (mm)
174.3 x 163.8 (4427 x 4150)
Machine Installed Height: in (mm)
111.1 (2823)
Machine System Weight: lb (kg)
18,560 (8420)
Fluid System Weight: lb (kg)
680 (1500)
Power Requirements [KVA]
200-230V [15.0] Built in AVR
Compressed Air Requirements
2.7 cu.ft./min. @ 71~100 psi


  • 36 sq”/hr in hardened D2 steel
  • One of the world’s fastest, large workpiece, high-accuracy wire EDM machines
  • Easy user interface


  • V500 Ultra High-Speed Power Supply
  • 36 sq”/hr. (using .014″V”type wire)
  • Submerged Machining to 15.6″ Deep
  • Automatic Fluid Level Control Automatic
  • Vertical Machine Tank Door
  • Three-Sided Work Table (Open Back)
  • Fine Grain “Dianite” Casting Material
  • Fixed Table Column Movement Design
  • Windows 7 Embedded Operating System
  • Power Master Control Improves Poor Flush Machining up to 50%
  • DC-Servo (Closed Loop) Torque Control Wire Tensioning System
  • Direct Drive Zero Backlash Ball Screw Couplings
  • Linear Motion Guide Ways
  • Digital 500 Watt AC Servo Drive System
  • All-Axes Absolute Control System
  • Linear Glass Scale Feedback (X-Y Axes)
  • Optical Rotary Encoder Feedback (U-V-Z-Axes)
  • Auto-Threading with Scrap Wire Processor (Chopper)
  • Inverter Controlled 16-Step Programmable Flushing
  • Full Time AE (Anti-Electrolysis) Power Supply Protection
  • Dielectric Fluid Chiller Standard
  • Auto-Oiler Lubrication System
  • Full 2-yr. Warranty with Triple Diamond Partnership Program
  • Program Input Methods: Keyboard, USB Flash Memory, and Ethernet with FTP standard

Want to learn more?

Click here to contact one of our experts who will gladly answer your questions and help you find the best option based on your needs.


Click here to request technical support, on-site service, training, or for purchasing replacement parts from our large inventory.