Spark & Co Logo


Table size (L x W) :
Large (over 12’)


Footprint * – (L x W)
31’ 3” x 12’ 2”
Height **
10’ 4”
Weight (tank empty)
8,700 lb


X-Y Cutting Envelope ***
27’ 2” x 6’ 7”
Z-Axis Travel ***
Table Size – (L x W)
27’ 10” x 7’ 0”


500 in/min
Linear Positional Accuracy
Ballbar Circularity
  • Fastest cutting speeds and best precision compared to any competitive abrasive waterjet in the industry
  • Backed by our exclusive Intelli-MAX Software with real world cutting data
  • Small, efficient footprint for minimal floor space utilization
  • The mobile control station allows operators direct and efficient access to the cutting process with storage for all of the tools and spares
  • Powerful all-in-one controller computer with large 23″ screen
  • Drive system sealed against water, dirt, and grit
  • No tool changes & minimal fixturing dramatically reduce setup
  • Machines a wide range of materials and thicknesses, from metals and composites to glass and plastics
  • Does not create heat-affected zones or mechanical stresses
  • Leaves behind a satin-smooth edge, reducing secondary operations
  • No noxious gases, liquid or oils used in, or caused by, the machining process
  • Environmentally “green” system with quiet and clean operation with low electrical consumption
  • Shipped as a completely pre-assembled and factory-tested system
  • Designed and manufactured at the OMAX factory in Kent, Washington, USA
  • Standard patent-pending Intelli-TRAX traction drive inside the X-Y Axis beams fully enclosed inside coated steel covers
  • Standard Intelli-VISOR SE System Monitoring offers predictive maintenance and system monitoring to minimize unexpected downtime
  • Standard programmable Motorized Z-Axis with a precision OMAX MAXJET 5i Nozzle boosts productivity and process efficiency
  • Standard scissor-style hard plumbing adds another level of safety by using contained high-pressure components, as well as contributes to a smaller footprint, lower maintenance, and higher reliability
  • Optional Rapid Water Level Control for cleaner, safer, and quieter submerged cutting completes most work below 80 dBA
  • Optional Bulk Abrasive Delivery System transports garnet from the assembly’s large hopper into the Zero Downtime Hopper located on the Z-Axis
  • Optional Variable Speed Solids Removal System (VS-SRS) designed for industrial use increases uptime through automated solids removal
  • Optional Intelli-CAM software program is available with two tools in one that can generate either 2D or 3D tool paths from 3D models.
  • Highly efficient, industry-proven direct drive pumps available up to 40 hp with operating efficiencies up to 85%
  • Uses substantially less cooling water than inefficient hydraulic intensifier pumps
  • Lowest electrical consumption compared to other pump technology

Want to See It in Action?

Request a free test cut!


Premium performance and high output come together in this robust, affordable waterjet cutter: the Large scale waterjet cutting machine MAXIEM® 2080, built to optimize your full-scale machining operations.

The large scale waterjet cutting machine  MAXIEM 2080 abrasive waterjet system boasts an X-Y cutting envelope of 27’ 2” x 6’ 7” (8,280 mm x 2,007 mm) a maximum cutting speed of a maximum cutting speed of 500 inches per minute (12,700 mm/min) and linear positioning accuracy of ±0.003” (±0.08 mm).

A real workhorse, this high-performance waterjet machine can handle virtually any material, from steel and titanium to carbon fiber, composites, glass, and more. A clean, cold cutting process, it doesn’t leave any heat affected zones or affect material integrity for reduced secondary operations.

Designed with similar bells and whistles as higher end models, the large scale waterjet cutting machine MAXIEM 2080 abrasive waterjet cutting machine delivers the highest nozzle horsepower in the industry with operating efficiency of up to 85% thanks to extremely efficient, ultra high-pressure drive pump technology and a diamond-integrated MAXJET® 5i nozzle for faster, more efficient cutting.

IntelliTRAX® linear drive technology translates into superior performance within harsh abrasive waterjet environments. Magnetic encoders provide one-micron resolution location feedback for exact positioning of the cutting head at all times. Designed specifically for abrasive waterjets, the system lasts longer and requires less maintenance because it is fully enclosed inside coated steel covers inside the X-Y axis beams.

The mobile control station lets you set up where it is most convenient, while IntelliMAX® software on the powerful controller with a high-resolution widescreen display allows you to quickly and easily program parts as complex as you please. You can even configure the waterjet machine for automated cutting, letting it run unattended to free up manpower for other tasks.

Optional accessories such as the A-Jet® for 5-axis cutting and taper compensation and IntelliVISOR® EX for expanded system monitoring expand your jetmachining capabilities and dramatically improve production.

Spark & Co. has been a distributor of OMAX waterjet cutting systems (PROTOMAX®GLOBALMAX®MAXIEM® and OMAX® series) for over a decade. No one is better equipped to meet your needs in waterjet, Laser (2D laser & 3D laserTube Laser, EDM (EDM SinkerWire EDMEDM Drill,MillingShaping and Finishing.

For more information :

Other Machines That Might Interest You

OMAX 55100
12’ 11” x 7’ 10”
14’ 1” x 12’ 2”