MAXIEM 1530

The Maxiem 1530 Waterjet  is designed for a wide range of machining needs, the MAXIEM® 1530 sets a higher standard for precision abrasive waterjet machining.

Boasting an X-Y cutting envelope of 10’ X 5’2” (3,048 mm x 1,575 mm), the rigid tank design is scaled to handle common plate sizes with room to spare.

The advanced linear motion system uses digital linear encoders to provide instant micron-level cutting head position feedback to the Windows® controller to assure accurate part production.

Equipped with a diamond-integrated MAXJET® 5i Nozzle, MAXIEM 1530 JetMachining Center can cut virtually any material quickly and efficiently, maximizing profitability.

Don’t let its black and red exterior fool you: the Maxiem 1530 Waterjet abrasive waterjet cutter is green through and through! No noxious gases, liquid or oils are used in, or caused by, the machining process, plus its features an environmentally-friendly “green” system designed for clean and quiet operation with low electrical consumption. Green for the environment and green for your wallet!

Thanks to its highly efficient direct drive pump, this unbeatable waterjet machine delivers the highest nozzle horsepower in the industry with operating efficiency of up to 85% for faster, more efficient cutting.

The Maxiem 1530 Waterjet uses substantially less cooling water than inefficient hydraulic intensifier pumps and boasts the lowest electrical consumption in the industry.

Optional accessories such as the A-Jet® for 5-axis cutting and taper compensation, rapid water level control for submerged cutting, and collision sensing terrain follower for machining irregular surfaces expand your jetmachining capabilities and dramatically improve production.

The MAXIEM line of abrasive waterjet machining centers meet a wide range of needs and incorporate proven technologies capable of providing a cost effective, affordable and highly productive solution to users. Configured for your business with broad accessory compatibility, MAXIEM built by OMAX is manufactured entirely in the United States.

Spark & Co. has been a distributor of OMAX waterjet cutting systems (PROTOMAX®GLOBALMAX®MAXIEM® and OMAX® series) for over a decade. No one is better equipped to meet your needs in waterjet, Laser (2D laser & 3D laserTube Laser, EDM (EDM SinkerWire EDMEDM Drill,MillingShaping and Finishing.

FEATURES

  • Fastest cutting speeds and best precision compared to any competitive abrasive waterjet in the industry
  • Backed by our exclusive Intelli-MAX Software with real world cutting data
  • Small, efficient footprint for minimal floor space utilization
  • The mobile control station allows operators direct and efficient access to the cutting process with storage for all of the tools and spares
  • Powerful all-in-one controller computer with large 23″ screen
  • Drive system sealed against water, dirt, and grit
  • No tool changes & minimal fixturing dramatically reduce setup
  • Machines a wide range of materials and thicknesses, from metals and composites to glass and plastics
  • Leaves behind a satin-smooth edge, reducing secondary operations
  • Does not create heat-affected zones or mechanical stresses
  • No noxious gases, liquid or oils used in, or caused by, the machining process
  • Environmentally “green” system with quiet and clean operation with low electrical consumption
  • Shipped as a completely pre-assembled and factory-tested system
  • Designed and manufactured at the OMAX factory in Kent, Washington, USA
  • Standard patent-pending Intelli-TRAX traction drive inside the X-Y Axis beams fully enclosed inside coated steel covers
  • Standard Intelli-VISOR SE System Monitoring offers predictive maintenance and system monitoring to minimize unexpected downtime
  • Standard programmable Motorized Z-Axis with a precision OMAX MAXJET 5i Nozzle boosts productivity and process efficiency
  • Optional scissor-style hard plumbing adds another level of safety by using contained high-pressure components, as well as contributes to a smaller footprint, lower maintenance, and higher reliability
  • Optional Rapid Water Level Control for cleaner, safer, and quieter submerged cutting completes most work below 80 dBA
  • Optional Bulk Abrasive Delivery System transports garnet from the assembly’s large hopper into the Zero Downtime Hopper located on the Z-Axis
  • Optional Variable Speed Solids Removal System (VS-SRS) designed for industrial use increases uptime through automated solids removal
  • Optional Intelli-CAM software program is available with two tools in one that can generate either 2D or 3D tool paths from 3D models.
  • Highly efficient, industry-proven direct drive pumps available up to 40 hp with operating efficiencies up to 85%
  • Uses substantially less cooling water than inefficient hydraulic intensifier pumps
  • Lowest electrical consumption compared to other pump technology

Want to learn more?

Click here to contact one of our experts who will gladly answer your questions and help you find the best option based on your needs.

SERVICE AND SUPPORT

Click here to request technical support, on-site service, training, or for purchasing replacement parts from our large inventory.