Spark & Co Logo

MAXIEM 2040

The The Maxiem 2040 Waterjet cutting machine system can easily machine almost any material, from steel and titanium to carbon fiber, composites, glass, and more. With an X-Y cutting envelope of 13’ 10” x 6’ 7” (4,216 mm x 2,007 mm) a maximum cutting speed of 500 inches per minute (12,700 mm/min) and linear positioning accuracy of ±0.003” (±0.08 mm), this heavy-duty waterjet cutter can handle any job you throw at it.

Model:
Maxiem
Table size (L x W) :
Large (over 12’)
Speed:
250-500”/min
Specifications
FEATURES
Avantages

MACHINE DIMENSIONS

Footprint * – (L x W)
18’ 0” x 12’ 2”
Height **
8’ 10”
Weight (tank empty)
5,500 lb

WORK ENVELOPE

X-Y Cutting Envelope ***
13’ 10” x 6’ 7”
Z-Axis Travel ***
12”
Table Size – (L x W)
16’ 1” x 7’ 0”

STANDARD MODEL SPECIFICATIONS

Speed
500 in/min
Linear Positional Accuracy
±0.0030"
Repeatability
±0.0010"
Ballbar Circularity
±0.0050"
  • Fastest cutting speeds and best precision compared to any competitive abrasive waterjet in the industry
  • Backed by our exclusive Intelli-MAX Software with real world cutting data
  • Small, efficient footprint for minimal floor space utilization
  • The mobile control station allows operators direct and efficient access to the cutting process with storage for all of the tools and spares
  • Powerful all-in-one controller computer with large 23″ screen
  • Drive system sealed against water, dirt, and grit
  • No tool changes & minimal fixturing dramatically reduce setup
  • Machines a wide range of materials and thicknesses, from metals and composites to glass and plastics
  • Does not create heat-affected zones or mechanical stresses
  • Leaves behind a satin-smooth edge, reducing secondary operations
  • No noxious gases, liquid or oils used in, or caused by, the machining process
  • Environmentally “green” system with quiet and clean operation with low electrical consumption
  • Shipped as a completely pre-assembled and factory-tested system
  • Designed and manufactured at the OMAX factory in Kent, Washington, USA
  • Standard patent-pending Intelli-TRAX traction drive inside the X-Y Axis beams fully enclosed inside coated steel covers
  • Standard Intelli-VISOR SE System Monitoring offers predictive maintenance and system monitoring to minimize unexpected downtime
  • Standard programmable Motorized Z-Axis with a precision OMAX MAXJET 5i Nozzle boosts productivity and process efficiency
  • Standard scissor-style hard plumbing adds another level of safety by using contained high-pressure components, as well as contributes to a smaller footprint, lower maintenance, and higher reliability
  • Optional Rapid Water Level Control for cleaner, safer, and quieter submerged cutting completes most work below 80 dBA
  • Optional Bulk Abrasive Delivery System transports garnet from the assembly’s large hopper into the Zero Downtime Hopper located on the Z-Axis
  • OptionalVariable Speed Solids Removal System (VS-SRS) designed for industrial use increases uptime through automated solids removal
  • Optional Intelli-CAM software program is available with two tools in one that can generate either 2D or 3D tool paths from 3D models.
  • Highly efficient, industry-proven direct drive pumps available up to 40 hp with operating efficiencies up to 85%
  • Uses substantially less cooling water than inefficient hydraulic intensifier pumps
  • Lowest electrical consumption compared to other pump technology
en-action

Want to See It in Action?

Request a free test cut!

MAXIEM 2040

Bigger is better when it comes the The Maxiem 2040 Waterjet cutting machine, a robust jetmachining center designed for high capacity production.

The The Maxiem 2040 Waterjet cutting machine system can easily machine almost any material, from steel and titanium to carbon fiber, composites, glass, and more. With an X-Y cutting envelope of 13’ 10” x 6’ 7” (4,216 mm x 2,007 mm) a maximum cutting speed of 500 inches per minute (12,700 mm/min) and linear positioning accuracy of ±0.003” (±0.08 mm), this heavy-duty waterjet cutter can handle any job you throw at it.

Thanks to its highly efficient direct drive pump, programmable motorized Z-axis and a diamond-integrated MAXJET® 5i Nozzle, this robust waterjet machine delivers the highest nozzle horsepower in the industry with operating efficiency of up to 85% for faster, more efficient cutting.

The Maxiem 2040 Waterjet cutting machin uses substantially less cooling water than inefficient hydraulic intensifier pumps and boasts the lowest electrical consumption in the industry.

OMAX’s patent-pending IntelliTRAX® traction drive, the first motion control system designed specifically for abrasive waterjets, inside the X-Y Axis beams is fully enclosed inside coated steel covers for greater durability and reduced machine maintenance. The system incorporates a magnetic linear encoder and an electronic drive control for precise positioning.

Do more for less with this next generation waterjet machining center that can be set up for automated cutting to run unattended. Innovative IntelliMAX® Software Suite on the powerful controller allows for easy programming of complex parts, with a high-resolution screen providing a crystal-clear view of tool paths.

With the included Intelli-VISOR® System Monitoring aiding in scheduling maintenance downtime, your MAXIEM 2040 can remain at peak efficiency.

A host of additional accessories, such as the A-Jet® 5-axis cutting head, take the MAXIEM  2040 over the top in terms of productivity and profitability for your 3D machining needs.

Spark & Co. has been a distributor of OMAX waterjet cutting systems (PROTOMAX®, GLOBALMAX®, MAXIEM® and OMAX® series) for over a decade. No one is better equipped to meet your needs in waterjet, Laser (2D laser & 3D laser, Tube Laser, EDM (EDM Sinker, Wire EDM, EDM Drill,) Milling, Shaping and Finishing.

For more information : https://www.omax.com/maxiem-waterjet/2040

Other Machines That Might Interest You

OMAX MOBILE JMC
29’ 4” x 21’ 8”
100-250”/min
OMAX OptiMAX 60X
OMAX 2652
11’ 7” x 5’ 7”
100-250”/min