Discover our MILLING products

ANDROID II

Featuring a heat symmetric basic frame with a high-grade cast iron base to ensure twist rigidity against spindle head motion, this micro-fine machine delivers unsurpassed speed and accuracy for the most complex contours. Two horizontally opposed flat linear motors equipped with powerful magnets ensure clearance in the side ways to cancel out any attraction forces. A dual-layer cooling system, an in-line oil chiller unit and a centralized exhaust and outside airflow system ensure that hot air will never collect at the spindle. Operation is easy thanks to the Super PC X + control with 10 different modes for convenient customization.

Overview and Technical Specifications

Contact us

CEGA SS-300

The CEGA SS-300 features a high-rigidity structure and minimized distance between the guide surface and spindle center, providing greater stability. The high-rigidity bed with ideal rib distribution guarantees static positioning accuracy of ±0.000060″ and ±0.000020″ repeatability.

The CEGA SS-300 is also capable of a wide speed range (200 – 30,000 RPM) using an oil-mist lubricated spindle and a 20-HP AC spindle motor. The new HSK-E40 holder achieves six times higher clamping force than a regular BT shank and Dual Balance Cylinders reduce the load for the ball screw and servo motor.

The CEGA SS-300 also features a Fanuc 31i-B5 Super High-Speed Processor and Al Contour Control II – a “NANO CNC System” with Intelligent Velocity Control, NANO Interpolation and NANO Smoothing.

Overview and Technical Specifications

Contact us

Eagle V5 (5-Axis)

The Eagle V5 is designed to be an ultra-rigid 5-axis vertical machining center with the capacity to handle a 550-pound workpiece on a 15.75-inch table surface.The Eagle V5 gantry-type 5-axis machining center is equipped with a 42,000 RPM integrated spindle, heavy-duty, linear roller guideways and a Dual Gantry Drive, the Eagle V5 is ideal for inclined surface, spiral contour, irregular contour and other complex machining tasks. Includes a Heidenhain iTNC-530 control unit and a side opening for robot loading from either side with pallets up to 15.7-inch square.

Overview and Technical Specifications

Contact us

HC-548EX

The HC-548EX features a high-rigidity, bridge-type monoblock structure with a minimized distance between the guide surface and spindle center. The high-rigidity bed with ideal rib distribution guarantees static positioning accuracy of ±0.000080″ and ±0.000060″ repeatability.

The HC-548EX is capable of a wide range (200 – 32,000 RPM) using a grease-packed spindle and a long-life AC motor. High-speed direct hard milling is possible via dry or semi-dry oil-mist systems. The new HSK-E40 holder achieves six times higher clamping force than a regular BT shank while the Air Balance Cylinder comes standard, reducing the load for ball screw and servo motor.

The HC-548EX features a Fanuc 31i-B5 Super High-Speed Processor and Al Contour Control II – A “NANO CNC System” with Intelligent Velocity Control, NANO Interpolation, and NANO Smoothing

Overview and Technical Specifications

Contact us

HC-658 II

Ideal for high-speed milling, drilling and tapping applications, the HC-658 II’s high-rigidity, bridge-type monoblock structure allows high-speed, high-precision machining, while the minimized distance between guide surface and spindle center provides greater stability.

The high-rigidity bed with ideal rib distribution guarantees a static positioning accuracy of ±0.000060″ and ±0.000020″ repeatability. The HC-658 II is capable of a wide range (200 – 32,000 RPM) using a grease-packed spindle and a long-life AC motor. High-speed direct hard milling is possible via dry or semi-dry oil-mist systems.

New HSK-E40 holder achieves six times higher clamping force than a regular BT shank while Dual Balance Cylinders reduce load for the ball screw and servo motor. The HC-658 II features a Fanuc 31i-B5 Super High-Speed Processor and Al Contour Control II – A “NANO CNC System” with Intelligent Velocity Control, NANO Interpolation and NANO Smoothing.

Overview and Technical Specifications

Contact us

EAGLE V9 (5-AXIS)

The Eagle V9 is designed to be an ultra-rigid 5-axis vertical machining center with the capacity to handle a 1,100-pound workpiece on a 23.6-inch table surface. The Heidenhain iTNC-530 control unit is mounted on a moveable pedestal for optimal positioning convenience. The Eagle V9 is designed with side opening in the casting to allow robot loading from either side with pallets up to 19.7” square.

The Eagle V9 gantry-type 5-axis machining center is built and designed to be highly rigid and incredibly precise. To achieve high rigidity and fine finish, the Eagle V9 employs a U-shape polymer concreate base, with B-axis support and a high-quality rotary table C-axis. It is also equipped with 36,000 RPM integrated spindle, a heavy-duty, roller-type linear guideways, and Dual Gantry Drive (two ball screws and linear glass scales in both the X and Y-axis). The Eagle V9 is capable of performing high-precision cuts with the X-, Y-, Z-, B- and C-axes moving simultaneously. Inclined surface machining, spiral contour machining, irregular contour machining and other complex cutting tasks can be made simple with the Eagle V9.

The Eagle V9’s B-axis uses a zero backlash gear drive while the C-rotary axis utilizes a direct drive motor, complimented with direct rotary encoders. This is superior to the conventional worm gear setup in drive transmission and power efficiencies.

Overview and Technical Specifications

Contact us

MEGA SS-400/600

The MEGA SS-400/600 ‘s high-rigidity, bridge-type monoblock structure allows for high-speed, high-precision machining with minimized distance between the guide surface and spindle center, providing greater stability.

The high-rigidity bed with ideal rib distribution guarantees static positioning accuracy of ±0.000059″ and ±0.000012″ repeatability. The MEGA SS-400/600 is capable of a wide range (3,000 – 40,000 RPM) using an oil-mist lubricated spindle and a long-life AC motor. High-speed direct hard milling is possible via dry or semi-dry oil-mist systems.

The new HSK-E25 holder achieves six times higher clamping force than a regular BT shank. The MEGA SS-400/600 features a Fanuc 31i-B5 Super High-Speed Processor and Al Contour Control II – a “NANO CNC System” with Intelligent Velocity Control, NANO Interpolation and NANO Smoothing.

Overview and Technical Specifications

Contact us

ZEUS-86

The ZEUS-86’s high-rigidity, bridge-type monoblock structure allows high-speed, high-precision machining while the minimized distance between the Z-axis guideways and spindle center provides greater stability. The high-rigidity bed with ideal rib distribution guarantees static positioning accuracy of ±0.000080″ and ±0.000030″ repeatability.

The ZEUS-86 is capable of a wide spindle speed range (200 – 25,000 RPM) using an oil-mist lubricated spindle and a 20-HP AC spindle motor. High-speed direct hard milling is possible via dry or semi-dry oil-mist systems. New HSK-E50 holder achieves six times higher clamping force than a regular BT shank while Dual Balance Cylinders reduce the load for the Z-axis ball screw and servo motor.

The ZEUS-86 is a unique member of the Roku machine family as it uses a Twin Drive System for the Y-axis.  This is a twin direct drive motor/ball screw system that is designed to move the large table and workpiece weight and still maintain its high degree of accuracy.

The ZEUS-86 features a Fanuc 31i-B5 Super High-Speed Processor and Al Contour Control II – A “NANO CNC System” with Intelligent Velocity Control, NANO Interpolation, and NANO Smoothing

Overview and Technical Specifications

Contact us

VISION 300

The Vision 300’s heat symmetric basic frame structure with a high-grade cast iron base ensures twist rigidity against spindle head motion. Its structure guarantees a reduction in thermal displacement, leading to a balance of high-rigidity and a reduced weight as a response. The two horizontally opposed flat linear motors equipped with powerful magnets ensure clearance in the side-ways, canceling out any attraction forces.

The system’s dual-layer cooling system combines direct forced oil cooling with a wide-range jacket to separate the spindle head from the casting. Leading to complete heat isolation, the double cooling system positioned between the heat generating coils is matched by an in-line oil chiller unit to ensure complete control of the coolant temperature. Hot air will never collect at the spindle thanks to the Vision 300’s centralized exhaust and outside airflow system.

High-quality builder Roku-Roku incorporated cutting-edge technology into its Vision 300 system, ultimately designing a well-built machine to ensure precise application and optimized velocity performance. The specialty machine tool builder implemented its Super PC III that can be set to one of 3 different modes to meet any machining requirements into the Vision 300. That level of customization, plus features including Fanuc’s Digital Intelligent Servo System with five-place decimal input and feedback, contribute to the Vision 300’s unsurpassed speed and accuracy despite even the most complex contours.

Overview and Technical Specifications

Contact us

HC-435 II

The HC-435 II features a high rigidity, bridge-type monoblock structure with a minimized distance between the guide surface and spindle center. The high-rigidity bed with ideal rib distribution was designed by computer analysis with a guaranteed static positioning accuracy of ±0.000059″ and ±0.000012″ repeatability.

The HC-435 II is capable of a wide range (3,000 – 36,000 RPM), using a grease-packed spindle and a long-life AC motor. High-speed direct hard milling is possible through dry or semi-dry oil-mist systems. The new HSK-E25 holder achieves six times higher clamping force than a regular BT shank while the Air Balance Cylinder comes standard, reducing the load for ball screw and servo motor.

The HC-435 II features a Fanuc 31i-A5 Super High-Speed Processor and Al Contour Control II—A “NANO CNC System” with Intelligent Velocity Control, NANO Interpolation, NANO Smoothing and an expanded look ahead of 1,000 blocks.

Overview and Technical Specifications

Contact us