SINTRAX SC Series
At Spark & Co, we know that uptime and precision are everything in laser cutting. SINTRAX Air Compressors deliver reliability, efficiency, and clean air – keeping your machines at peak performance.
In fiber laser cutting, compressed air quality directly impacts speed, edge finish, and operating costs. SINTRAX Air Compressors are designed for laser applications, providing stable high-pressure, dry air with advanced energy-saving features.
Their 4-stage compression system reduces heat, extends component life, and ensures consistent performance. With built-in Variable Frequency Drive (VFD), SINTRAX Air Compressors adjust in real time to match demand, lowering energy use by up to 30% and reducing costs.
The integrated dryer and filtration system protect optics and ensure smooth cutting, making SINTRAX Air Compressors the ideal solution for stainless steel, carbon steel, aluminum, and other demanding applications.
The integrated air dryer and multi-stage filtration ensure a steady supply of dry, oil-free compressed air. This eliminates moisture and contaminants that can damage optics, discolor materials, or leave rough edges—resulting in smooth, precise cuts every time.
Traditional fixed-speed compressors waste energy by running at full load even when demand is low. The SINTRAX compressor uses a Variable Frequency Drive (VFD) to automatically adjust motor speed to match your shop’s real-time air demand. This reduces energy consumption by up to 30%, cutting electricity bills and maximizing ROI.
Fiber lasers often require 16–24 bar for clean, efficient cutting on stainless steel, carbon steel, and aluminum. The SINTRAX 4-stage design delivers stable, high-pressure output without overloading the system, ensuring reliability and consistency during long production runs.
Compressed air can replace nitrogen for cutting mild steel, aluminum, and galvanized sheet in many cases—at a fraction of the cost. With SINTRAX, shops can save thousands per year on gas expenses while maintaining strong cut performance.
Stable pressure, oil-free air, and reduced heat generation protect sensitive laser optics and components. This lowers consumable replacement costs, minimizes downtime, and extends the life of your laser cutting machine.
Unlike standard compressors that require multiple add-ons, the SINTRAX comes with an integrated dryer and filtration system—making it a turnkey solution designed specifically for laser cutting shops. Less setup, fewer headaches, faster results.
 |  |  |  |  |
|
|---|---|---|---|---|---|
| LightWELD 2000XR Welding & Cleaning | LightWELD 1500XR Extended Range Welding & Cleaning | LightWELD 1500XC Welding & Cleaning | LightWELD 1500 Welding | LightWELD 1000 Welding |
|
| Welding Capability: Steels | Stainless, Galvanized & Mild Steel: up to 8 mm (0.315” ) | Staineless Steel, Mild Steel, Galvanized Steel 6.35 mm (0.250'') | Staineless Steel, Mild Steel, Galvanized Steel 4 mm (0.160'') | Staineless Steel, Mild Steel, Galvanized Steel 4 mm (0.160'') | Staineless Steel, Mild Steel, Galvanized Steel 4 mm (0.160'') |
| Welding Capability: Aluminium | Aluminum 3 & 5 Series: up to 8 mm (0.315”) Aluminum 6 Series: up to 5 mm (0.200”) | Aluminium (3XXX, 5XXX, 6XXXseries) 6.35 mm (0.250'') | Aluminium (3XXX, 5XXX series) 4 mm (0.160'') | Aluminium (3XXX, 5XXX series) 4 mm (0.160'') | Aluminium (3XXX, 5XXX series) 4 mm (0.160'') |
| Welding Capability: Titanium and Nickel Alloys | Titanium & Nickel Alloys: up to 7 mm (0.275” ) | Titanium and Nickel Alloys 6.35 mm (0.250'') | - | - | - |
| Welding Capability-Cooper | Copper: up to 3 mm (0.120”) | Copper 2 mm (0.080'') | - | - | - |
| Wooble Welding | Up to 5 mm width | Up to 5 mm width | Up to 5 mm width | Up to 5 mm width | Up to 5 mm width |
| Cleaning Capability | Pre- & Post-weld up to 15 mm width | Pre- & Post-weld up to 15 mm | Pre- & Post-weld up to 15 mm | - | - |
| High Frequency Peak Power for Cleaning | 3000 W | 2500 W | 2500 W | - | - |
| Wire Welding Capability | Yes | Yes | Yes | Yes | Yes |
 |  |  |  |  |
|
|---|---|---|---|---|---|
| OPTIMAX | OMAX | MAXIEM | GLOBALMAX | PROTOMAX | |
| Product Description | The complete waterjet machine utilizing the best OMAX has to offer. | The workhorse of waterjets, the OMAX line offers precision, performance, and power. | Maximum capability with the widest accessory compatibility. | Configured for your business with broad accessory compatibility. | Value abrasive waterjet with essential accessory compatibility. |
| 3-Axis | Programmable Z | Programmable Z | Programmable Z | Programmable Z | Manual Z |
| 5-Axis | VersaJET, TiltaJET | A-Jet, TiltaJET | A-Jet | ||
| 6-Axis | Coming Soon | Rotary Axis with A-Jet/TiltaJET | |||
| Cutting Nozzle | MAXJet 5i | MAXJet 5i | MAXJet 5i | GlobalMAX Nozzle | ProtoMAX Nozzle |
| Cutting Bed Sizes | 10'0" x 5'2" to 13'4 x 6'8" 3.04 m x 1.57 m to 4.06 m x 2.03 m | 2'5" x 2'2" to 46'8" x 13'4" 0.73 m x 0.66 m to 14.2 m x 4.0 m | 5’2” x 5’2” to 20'6" x 10'2" 0.79 m x 0.77 m to 6.2 m x 3.1 m | 2'7" x 5'0" to 13'3" x 6'8" 0.80 m x 1.5 m to 4.0 m x 2.0 m | 12" x 12" 0.3 m x 0.3 m |
| Cutting Bed Weight Capacity | 400 lbs/sq ft 1950 kg/m2 | 400 lbs/sq ft 1950 kg/m2 | 300 lbs/sq ft 1465 kg/m2 | 100 lbs/sq ft 488 kg/m2 | 50 lbs/ sq ft 244 kg/m2 |
| Ballbar Circularity | ±0.003" ±0.076 mm | ±0.0025" to ±0.005" ±0.064 mm | ±0.005" ±0.127 mm | ±0.007" ±0.178 mm | ±0.016" ±0.406 mm |
