It’s pretty simple: clean water equals pump performance.
Waterjet tips to optimize performance : Contaminants in the water can wreak havoc on pump components and pressure lines. Too much calcium will create water turbulence when stuck in your diamond, which reduces mixing tube and/or nozzle life.
By removing microscopic particles produced during the waterjet cutting process, you’ll maximize performance and profitability.
Here are a few tips to keep your pump in tip-top shape:
- Test water quality. Your seals will last longer, plus you’ll cut down on downtime and operating costs.
- Maintain PH levels around 7.5; otherwise, stainless steel components wear faster.
- Check pressure gauges regularly.
- Don’t skimp on filters: they have a direct impact on your pump and high-pressure components.
- Use an absolute 1- and 0.5-micron filter at the pump.
- Opt for a pre-filtration wall mount of 1- and 3-micron filters to keep water clean and reduce filter cost.
As a waterjet tips to optimize performance a word or two about filters
Water filters are rated by the sizes of particles that will pass through them. These ratings are expressed in microns, with the two most used being nominal and absolute.
An absolute filter rating means that 99.9% of the particles larger than a specified micron rating will be trapped on or within the filter. In other words, the filter will reject virtually all of the particles of the given size. Absolute ratings are usually used for the tightest filters and for purposes where efficiency really matters.
A nominal filter rating indicates the approximate size particle, the majority of which will not pass through the filter. A nominal filter will filter out at least 85% of the particles of the size for which it is rated. In other words, a filter that is rated as a 1-micron nominal can be expected to pick out 85% of the particles that are 1 micron or larger from the water that passes through it.
In conclusion, absolute filters will increase the life of your seals and pump components and optimize pump performance.
The Importance of Water in Abrasive Waterjet Cutting – OMAX Waterjet
Visit Spark & Co web site : www.spark-co.com