Spark & Co Logo

OMAX MICROMAX

The ultra precision waterjet MICROMAX® JetMachining Center is the ideal solution for ultra-precision abrasive waterjet machining.

Model:
OMAX
Table size (L x W) :
Small (less than 5’)
Speed:
0-100”/min
Specifications
FEATURES

MACHINE DIMENSIONS

Footprint * – (L x W)
6' 2" x 7' 0"
Height **
7' 0"
Weight (tank empty)
3,800 lb

WORK ENVELOPE

X-Y Cutting Envelope ***
2' 1" x 2' 1"
Z-Axis Travel ***
4.5"
Table Size – (L x W)
2' 11" x 3' 0"

STANDARD MODEL SPECIFICATIONS

Speed
100 in/min
Linear Positional Accuracy
±0.0001"
Repeatability
±0.0001"
Ballbar Circularity
±0.0005"
  • Small, efficient footprint for minimal floorspace utilization
  • Ultra waterjet precision with 0.1 micron linear optical encoder system
  • Highly rigid structure with low mass bridges and carriages
  • Stiff construction greatly reduces vibration and increases accuracy
  • Vibration isolation of table and gantries
  • All components have matched thermal expansion
  • Revolutionary patent-pending process for fine abrasive feed rate
  • Full enclosure with environmental controls provides quiet, safe and clean operation below 80db
  • Advanced pressure controls for piercing delicate materials
  • No heat-affected zones or mechanical stresses
  • Standard OMAX 7/15 Mini MAXJET 5 Nozzle acquires finer precision cutting capability with a 0.007″ orifice and a 0.015″ mixing tube combination
  • Standard Tilt-A-Jet taper eliminating abrasivejet cutting head
  • Standard Rapid Water Level Control for cleaner, safer, and quieter submerged cutting completes most work below 80 dBA
  • Machines a wide range of materials with high accuracy
  • Can machine hardened steel as easily as annealed steel
  • Easily cut non-conductive and reflective materials
  • Leaves behind a satin-smooth edge, reducing secondary operations
  • Shipped as a completely pre-assembled and factory-tested system
  • Designed and manufactured at the OMAX factory in Kent, Washington, USA
en-action

Want to See It in Action?

Request a free test cut!

OMAX MICROMAX

The ultra precision waterjet MICROMAX® JetMachining Center is the ideal solution for ultra-precision abrasive waterjet machining.

Utilizing advanced high-precision optical linear encoders, innovative vibration isolation, and proven software control systems, the ultra precision waterjet  MICROMAX JetMachining Center is capable of a positioning accuracy of less than five microns while retaining all the advantages of abrasive waterjet machining.

The ultra precision waterjet MICROMAX machines a wide range of materials with high accuracy, handling hardened steel as easily as annealed steel and easily cutting non-conductive and reflective materials. It machines stainless steel, titanium, carbon fiber, PEEK, glass, nitinol, graphite, copper, composites, laminates, and more, with high precision, smooth finishing and no heat-affected zones or mechanical stresses, for either prototyping or production.

Small but mighty, one of the many advantages of the ultra precision waterjet MICROMAX is its small, efficient footprint for minimal floorspace utilization. Its highly rigid structure with low mass bridges and carriages plus vibration isolation of table and gantries greatly reduces vibration and increases accuracy. What’s more, all components have matched thermal expansion to keep performance smooth and stable.

Equipped with a host of standard features, this powerful little abrasive waterjet is the one you want in your shop: the OMAX 7/15 Mini MAXJET® 5 Nozzle for finer precision cutting capability with a 0.007″ (0.1778 mm) orifice and a 0.015″ (0.381 mm) mixing tube combination, the Tilt-A-Jet® taper eliminating abrasive jet cutting head and a Rapid Water Level Control for cleaner, safer, and quieter submerged cutting.

The MICROMAX offers all this, plus a revolutionary patent-pending process for fine abrasive feed rate, advanced pressure controls for piercing delicate materials and a full enclosure with environmental controls that provides quiet, safe and clean operation below 80db.

Spark & Co. has been a distributor of OMAX waterjet cutting systems (PROTOMAX®GLOBALMAX®MAXIEM® and OMAX® series) for over a decade. No one is better equipped to meet your needs in waterjet, Laser (2D laser & 3D laserTube Laser, EDM (EDM SinkerWire EDMEDM Drill,MillingShaping and Finishing.

For more information : https://www.omax.com/omax-waterjet/micromax

Other Machines That Might Interest You

OMAX 120X
21’ 8” x 17’ 3”
100-250”/min
MAXIEM 2080
31’ 3” x 12’ 2”
250-500”/min
PROTOMAX
41.5” x 39.5”
0-100”/min