Spark & Co Logo

OMAX 60120

The Omax waterjet 60120 JetMachining Center may be the smallest of our bridge-style waterjet machines, but don’t let its size fool you: with a table big enough to handle larger stock, this small but mighty abrasive waterjet cutS more for less.

Model:
OMAX
Table size (L x W) :
Average (from 5’ to 12’)
Speed:
100-250”/min
Specifications
Benefits & Features

MACHINE DIMENSIONS

Footprint * – (L x W)
18’ 9” x 9’ 2”
Height **
9’ 7”
Weight (tank empty)
6,200 lb

WORK ENVELOPE

X-Y Cutting Envelope ***
10’ 6” x 5’ 2”
Z-Axis Travel ***
8”
Table Size – (L x W)
12’ 0” x 6’ 5”

STANDARD MODEL SPECIFICATIONS

Speed
180 in/min
Linear Positional Accuracy
±0.0010"
Repeatability
±0.0010"
Ballbar Circularity
±0.0025"
  • Fastest cutting speeds and best precision compared to any competitive abrasive waterjet in the industry
  • Backed by our exclusive IntelliMAX Softwarewith real world cutting data
  • Robust and accurate design for tight tolerance cutting and reliable operation
  • Easy operator access to the work area
  • Small, efficient footprint for minimal floor space utilization
  • Precision X-Y Axis rigidly mounted to the cutting table
  • Pre-loaded linear bearings and precision ball screws
  • Drive system sealed against water, dirt, and grit
  • No tool changes & minimal fixturing dramatically reduce setup
  • Machines a wide range of materials and thicknesses, from metals and composites to glass and plastics
  • Leaves behind a satin-smooth edge, reducing secondary operations
  • Does not create heat-affected zones or mechanical stresses
  • Environmentally “green” system uses only natural garnet abrasive and water in the cutting process
  • No noxious fumes, liquid or oils used in, or caused by, the machining process
  • Shipped as a completely pre-assembled and factory-tested system
  • Designed and manufactured at the OMAX factory in Kent, Washington, USA
  • Standard programmable Motorized Z-Axiswith a precision OMAX MAXJET 5i Nozzleboosts productivity and process efficiency
  • Standard IntelliCAM software program is available with two tools in one that can generate either 2D or 3D tool paths from 3D models.
  • Standard patent-pending IntelliTRAX traction drive inside the X-Axis beams fully enclosed inside coated steel covers
  • Standard IntelliVISOR SE System Monitoringoffers predictive maintenance and system monitoring to minimize unexpected downtime
  • Standard scissor-style hard plumbing adds another level of safety by using contained high-pressure components, as well as contributes to a smaller footprint, lower maintenance, and higher reliability
  • Standard Rapid Water Level Control for cleaner, safer, and quieter submerged cutting completes most work below 80 dBA
  • Standard 600 lb Bulk Abrasive Delivery System transports garnet from the assembly’s large hopper into the Zero Downtime Hopper located on the Z-Axis
  • Optional Tilt-A-Jet taper eliminating abrasivejet cutting head
  • Optional Variable Speed Solids Removal System (VS-SRS) designed for industrial use increases uptime through automated solids removal
  • High efficiency EnduroMAX pump system available in 30 hp, 40 hp, 50 hp or 100 hp with operating efficiencies up to 85%
  • EnduroMAX pump technology delivers the highest nozzle horsepower in the industry for faster and more efficient cutting
  • Highly robust and reliable pump design capable of over 1,000 hours between maintenance
  • Uses substantially less cooling water than inefficient hydraulic intensifier pumps
  • Lowest electrical consumption compared to other pump technology
en-action

Want to See It in Action?

Request a free test cut!

OMAX 60120

The Omax waterjet 60120 JetMachining Center may be the smallest of our bridge-style waterjet machines, but don’t let its size fool you: with a table big enough to handle larger stock, this small but mighty abrasive waterjet cutS more for less.

If your shop needs unobstructed material loading, the bridge-style Y-axis is the answer. The Omax waterjet 60120 rapidly and precisely gets the job done, maximizing both machine time and profit margins.

The Omax waterjet 60120  abrasive waterjet system can easily machine almost any material and thicknesses, from steel and titanium to carbon fiber, composites, glass, and more. With an X-Y cutting envelope of 10’ 6” x 5’ 2” (3,200mm x 1,575mm) a maximum cutting speed of 180 inches per minute (4,572 mm/min) and a linear positioning accuracy of +0.0010” (±0.0254 mm), this bridge-style waterjet cutter maximizes profitability through operational efficiency.

The Omax waterjet 60120 abrasive waterjet machine system comes standard with a host of high-performance features, including a 600lb-bulk abrasive delivery system that transports garnet from the assembly’s large hopper into the Z-Axis zero-downtime hopper and a rapid water level control for cleaner, safer, and quieter submerged cutting below 80 dBA.

OMAX’s patent-pending IntelliTRAX® traction drive, an industry first high-precision linear drive motion control system designed specifically for abrasive waterjets, inside the X-Y axis beams is fully enclosed inside coated steel covers for greater durability and reduced machine maintenance. The system incorporates a magnetic linear encoder and an electronic drive control for precise positioning.

Thanks to its highly efficient EndurMAX® direct drive pump, programmable motorized Z-axis and durable diamond-integrated MAXJET® 5i Nozzle, the OMAX 60120 waterjet cutter belts out extreme nozzle horsepower while saving on energy costs.

This reliable waterjet machine boasts the lowest electrical consumption in the industry, offering up to 85% operating efficiency for faster, more efficient cutting while using substantially less cooling water than inefficient hydraulic intensifier pumps.

This robust system requires little maintenance and is as easy to use as conventional machine tools.

Spark & Co. has been a distributor of OMAX waterjet cutting systems (PROTOMAX®GLOBALMAX®MAXIEM® and OMAX® series) for over a decade. No one is better equipped to meet your needs in waterjet, Laser (2D laser & 3D laserTube Laser, EDM (EDM SinkerWire EDMEDM Drill,MillingShaping and Finishing.

For more information : https://www.omax.com/omax-waterjet/60120

Other Machines That Might Interest You

OMAX 5555
10’ 11” x 7’ 11”
100-250”/min
MAXIEM 3060
24’ 6” x 15’ 8”
100-250”/min
GLOBALMAX 1530
12′ 8″ x 12′ 0″
250-500”/min