Spark & Co Logo

MAXIEM 2060

The next generation of  large waterjet cutting machine MAXIEM® 2060 JetMachining Center sets a new standard for abrasive waterjet machining. Faster, smoother, and more precise, the MAXIEM 2060 is ideal for a wide range of modern, large-format machining needs.

Model:
Maxiem
Table size (L x W) :
Large (over 12’)
Speed:
250-500”/min
Specifications
FEATURES
Avantages

MACHINE DIMENSIONS

Footprint * – (L x W)
24’ 6” x 12’ 2”
Height **
8’ 10”
Weight (tank empty)
7,200 lb

WORK ENVELOPE

X-Y Cutting Envelope ***
20’ 6” x 6’ 7”
Z-Axis Travel ***
12”
Table Size – (L x W)
22’ 9” x 7’ 0”

STANDARD MODEL SPECIFICATIONS

Speed
500 in/min
Linear Positional Accuracy
±0.0030"
Repeatability
±0.0010"
Ballbar Circularity
±0.0050"
  • Fastest cutting speeds and best precision compared to any competitive abrasive waterjet in the industry
  • Backed by our exclusive Intelli-MAX Software with real world cutting data
  • Small, efficient footprint for minimal floor space utilization
  • The mobile control station allows operators direct and efficient access to the cutting process with storage for all of the tools and spares
  • Powerful all-in-one controller computer with large 23″ screen
  • Drive system sealed against water, dirt, and grit
  • No tool changes & minimal fixturing dramatically reduce setup
  • Machines a wide range of materials and thicknesses, from metals and composites to glass and plastics
  • Does not create heat-affected zones or mechanical stresses
  • Leaves behind a satin-smooth edge, reducing secondary operations
  • No noxious gases, liquid or oils used in, or caused by, the machining process
  • Environmentally “green” system with quiet and clean operation with low electrical consumption
  • Shipped as a completely pre-assembled and factory-tested system
  • Designed and manufactured at the OMAX factory in Kent, Washington, USA
  • Standard patent-pending Intelli-TRAX traction drive inside the X-Y Axis beams fully enclosed inside coated steel covers
  • Standard Intelli-VISOR SE System Monitoring offers predictive maintenance and system monitoring to minimize unexpected downtime
  • Standard programmable Motorized Z-Axis with a precision OMAX MAXJET 5i Nozzle boosts productivity and process efficiency
  • Standard scissor-style hard plumbing adds another level of safety by using contained high-pressure components, as well as contributes to a smaller footprint, lower maintenance, and higher reliability
  • Optional Rapid Water Level Control for cleaner, safer, and quieter submerged cutting completes most work below 80 dBA
  • Optional Bulk Abrasive Delivery System transports garnet from the assembly’s large hopper into the Zero Downtime Hopper located on the Z-Axis
  • Optional Variable Speed Solids Removal System (VS-SRS) designed for industrial use increases uptime through automated solids removal
  • Optional Intelli-CAM software program is available with two tools in one that can generate either 2D or 3D tool paths from 3D models.
  • Highly efficient, industry-proven direct drive pumps available up to 40 hp with operating efficiencies up to 85%
  • Uses substantially less cooling water than inefficient hydraulic intensifier pumps
  • Lowest electrical consumption compared to other pump technology
en-action

Want to See It in Action?

Request a free test cut!

MAXIEM 2060

The next generation of  large waterjet cutting machine MAXIEM® 2060 JetMachining Center sets a new standard for abrasive waterjet machining. Faster, smoother, and more precise, the MAXIEM 2060 is ideal for a wide range of modern, large-format machining needs.

The machine knows exactly where the cutting head is at all times thanks to the exclusive IntelliTRAX® linear drive system that uses magnetic encoders to provide one-micron resolution location feedback.  Designed specifically for abrasive waterjets, the system requires less maintenance because it is fully enclosed inside coated steel covers inside the X-Y axis beams. Longer life, less downtime.

Fast, precise and efficient is the name of the game for the large waterjet cutting machine MAXIEM 2060, equipped with a highly efficient direct drive pump and diamond-integrated MAXJET® 5i Nozzle to deliver the highest nozzle horsepower in the industry with operating efficiency of up to 85% for faster, more efficient cutting.

MAXIEM uses substantially less cooling water than inefficient hydraulic intensifier pumps and boasts the lowest electrical consumption in the industry.

Easily program complex parts and set up for automated cutting to run unattended with user-friendly IntelliMAX® software on the powerful controller with a high-resolution widescreen display providing a crystal-clear view of tool paths. The mobile control station provides flexibility in controller positioning to suit your workspace.

The MAXIEM 2060 abrasive waterjet system slices through almost any material, from steel and titanium to carbon fiber, composites, glass, and more. With an X-Y cutting envelope of 20’ 6” x 6’ 7” (6,248 mm x 2,007 mm) a maximum cutting speed of 500 inches per minute (12,700 mm/min) and linear positioning accuracy of ±0.003” (±0.08 mm), this high-performance waterjet cutter just keeps going.

Optional accessories such as the A-Jet® for 5-axis cutting and taper compensation and IntelliVISOR® EX for expanded system monitoring expand your jetmachining capabilities and dramatically improve production.

Spark & Co. has been a distributor of OMAX waterjet cutting systems (PROTOMAX®GLOBALMAX®MAXIEM® and OMAX® series) for over a decade. No one is better equipped to meet your needs in waterjet, Laser (2D laser & 3D laserTube Laser, EDM (EDM SinkerWire EDMEDM Drill,MillingShaping and Finishing.

For more information : https://www.omax.com/maxiem-waterjet/2060

 

Other Machines That Might Interest You

MATRIX BULK RACK DELIVERY SYSTEM
MAXIEM 3060
24’ 6” x 15’ 8”
100-250”/min
OMAX OptiMAX 80X
250-500”/min