With a wide range of wire EDM machines, EDM driving machines (including large plastic driver models) and decades of experience, Mitsubishi EDM helps customers maximize productivity and maintain a competitive edge. A leader in EDM innovation, Mitsubishi EDM develops the most accurate, reliable and technically advanced products in the world.

Titan Drill EDMs are innovative machines using Titan Force series technology, widely used in a variety of applications including aerospace, tooling and mold processing. By becoming their official Canadian distributor we continue to innovate with ultra-efficient and high performance machines to get the job done.

Discover our EDM products

MV1200-R ADVANCE TYPE M800

Reduce operating costs and boost productivity with the MV1200-R Advance Plus M800 Mitsubishi Wire EDM. Offering improved machine construction, auto-threading, internal machine communication and enhanced power supply technology, this high-tech wire EDM machine features the user-friendly Mitsubishi M800 series control with a 19-inch touchscreen and an ultra-durable, non-contact Cylindrical Drive System on the X, Y, U & V axis drives.

 

Overview and Technical Specifications

Contact us

MV2400-R ADVANCE TYPE M800

The all-new MV2400-R Advance Plus M800 Mitsubishi Wire EDM offers value and accuracy through improved machine construction, auto-threading, internal machine communication, enhanced power supply technology and reduced operating costs. Features a high-performance non-contact Cylindrical Drive System on the X, Y, U & V axis drives for steadfast reliability and the new Mitsubishi M800 series control with 19-inch touchscreen for user-friendly interface.

 

Overview and Technical Specifications

Contact us

MV2400-ST ADVANCE TYPE M800

Increase productivity with the best auto threading system on the market today: with an annealing length of over 21 inches, the MV2400-ST Advance Type M800 Wire EDM can submerge cut up to 16.5 inches deep and thread the maximum workpiece height, both at the start point and through the gap if needed for broken wire recovery. To this add Mitsubishi’s highly reliable non-contact Cylindrical Drive System and M800 series control with a 19-inch touchscreen for easy operation.

 

Overview and Technical Specifications

Contact us

MV4800-S ADVANCE TYPE M800

The Mitsubishi MV4800-S Advance Type M800 Wire EDM  has added several new features such as a wide tank door window, a built in 55 lb. wire spool system and thermal Buster which is a thermal stability system that circulates chilled dielectric fluid to key areas throughout the machine structure. Other key machine features are the highly reliable non-contact cylindrical drive system and the new Mitsubishi M800 series control with a 19-inch cell phone like touchscreen—providing easier user interface than previous models. With advancements in machine construction and power supply technology, the Mitsubishi MV4800-S Advance Type M800 is sure to revolutionize Wire EDM machining and increase your shop’s productivity.

 

Overview and Technical Specifications

Contact us

FA40V ADVANCE

With machine performance up to 36 square inches per hour in hardened D2 steel, the FA40V Advance is one of the world’s fastest, large workpiece, high-accuracy wire EDM machines. The Mitsubishi FA40V Advance Wire EDM features the new Mitsubishi EDM M700 series control with a 15-inch touchscreen, providing easy user interface. The new features available with the FA40V Advance exemplify Mitsubishi’s continued dedication to high-precision, innovative machining and are sure to advance your shop’s production.

 

Overview and Technical Specifications

Contact us

FA50V ADVANCE

One of the world’s fastest, large workpiece, high-accuracy wire EDM machines, the FA50V Advance cuts up to 36 square inches per hour in hardened D2 steel. Includes the user-friendly M800 series control interface with 19-inch touchscreen for easy operation.

 

Overview and Technical Specifications

Contact us

EA8PS ADVANCE

The Mitsubishi EA8PS Advance Sinker EDM with “Thermal Buster” is the ideal choice for tight-tolerance applications such as die and mold. The new Thermal Displacement Compensation System and Z-Axis cooling mechanism improves accuracy by tracking and compensating for machine temperature changes. The standard granite table and NP2 circuit provides ultra-fine, satin surface finishing anywhere on the table surface. An enhanced Glossy Mirror Finishing Circuit “LLTX” improves mold releasability without the need for polishing. If you work with exotic materials such as PCD, cBN or carbide, the HPS circuit enhances machining speed while reducing electrode wear. Meanwhile, the FP80PS energy-saving power supply reduces electrical consumption by 20 percent (compared to the previous FP model). Like most EDM machines, the EA8PS features the new MITSUBISHI EDM M700 series control with a 64-bit RISC processor and 15-inch touchscreen for easier user interface.

 

Overview and Technical Specifications

Contact us

EA8S ADVANCE

The Mitsubishi EA8S Advance Sinker EDM features the new Mitsubishi EDM M700 series control with 15” touch screen and FP80S energy-saving power supply, reducing electrical consumption by 20% as compared to the previous FP model. The all-new Power Master GF2 Adaptive Control reduces graphite electrode wear by as much as 80%.  The addition of the new SS Jump 5 optimizes jump up acceleration control to stabilize high-speed No-Flush burning.

 

Overview and Technical Specifications

Contact us

EA12PS ADVANCE

The Mitsubishi EA12PS Advance Sinker EDM with “Thermal Buster” is the ideal choice for tight-tolerance applications such as die and mold. The new Thermal Displacement Compensation System and Z-Axis cooling mechanism improves accuracy by tracking and compensating for machine temperature changes. The standard NP2 circuit provides an ultra-fine, satin surface finishing anywhere on the table surface. An enhanced Glossy Mirror Finishing Circuit “LLTX” improves mold releasability without the need for polishing. If you work with exotic materials such as PCD, cBN or carbide, the HPS circuit enhances machining speed while reducing electrode wear. Meanwhile, the FP80PS Sinker EDM energy-saving power supply reduces electrical consumption by 20 percent (compared to the previous FP model). Like most Sinker EDM machines, the EA12PS features the new MITSUBISHI M700 series control with a 64-bit RISC processor and 15-inch touchscreen for easier user interface.

 

Overview and Technical Specifications

Contact us

EA12S ADVANCE

The Mitsubishi EA12S Advance Sinker EDM features the new M700 series control with 15” touch screen and FP80S energy saving power supply, reducing electrical consumption by 20% as compared to the previous FP model. The all new Power Master GF2 Adaptive Control reduces graphite electrode wear by as much as 80%.  The addition of the new SS Jump 5 optimizes jump up acceleration control to stabilize high speed No-Flush burning.

 

Overview and Technical Specifications

Contact us

EA12ST ADVANCE

The Mitsubishi EA12ST Advance Sinker EDM has all the same great features as the EA12S Advance, but offers a larger fixed worktank to better accommodate a rotary table or larger workpiece. It features the new MITSUBISHI M700 series control with 15” touch screen and FP80S energy saving power supply, reducing electrical consumption by 20% (as compared to the previous FP model). The all new IDPM “Intelligent Digital Power Master” Adaptive Control reduces graphite electrode wear by as much as 40%. The addition of the new SS Jump 5 system optimizes jump up acceleration control to stabilize high speed No-Flush burning

 

Overview and Technical Specifications

Contact us

EA28V ADVANCE

The new Mitsubishi EA28V Advance Sinker EDM allows for the high-speed machining of tungsten carbide with copper tungsten electrodes. The new Sinker EDM machine houses the standard V-series power supply which reduces electrode wear by as much as 50 percent when machining tungsten carbide. The Mitsubishi EA28V Advance Sinker EDM features the new M700 series control with a 15-inch touchscreen. And the FP120V energy-saving power supply reduces electrical consumption by 20 percent compared to the previous FP model.

 

Overview and Technical Specifications

Contact us

EA28V-LS ADVANCE

The Mitsubishi EA28V-LS Advance Sinker EDM has all the same great features as the EA28V Advance, but offers a larger worktank and axes travels to better accommodate a rotary table or larger workpiece. It features the new MITSUBISHI EDM M700 series control with 15” touch screen and FP80V energy saving power supply, reducing electrical consumption by 20% (as compared to the previous FP model). The all new IDPM “Intelligent Digital Power Master” Adaptive Control reduces graphite electrode wear by as much as 40%. The addition of the new SS Jump 5 system optimizes jump up acceleration control to stabilize high speed No-Flush burning.

 

Overview and Technical Specifications

Contact us

GANTRY EAGLE 800

Enjoy thermal stability and rigidity plus all-around work area access with the Gantry Eagle 800 Sinker EDM featuring the all-new Eagle PowerTec power supply with the world’s first Adaptive Current-Shape generator. Each discharge pulse calculates and creates the ideal current shape to meet the exact discharge requirements at that precise instant. Eagle PowerTec, in combination with Eagle Power Jump, reduces burn time by up to 50 percent and significantly reduces electrode wear, especially in graphite. A dual 32-bit, PC-based CNC control processes data faster and provides enhanced servo control.

 

Overview and Technical Specifications

Contact us

GANTRY EAGLE 1200

Enjoy thermal stability and rigidity plus all-around work area access with the Gantry Eagle 1200 Sinker EDM featuring the all-new Eagle PowerTec power supply with the world’s first Adaptive Current-Shape generator. Each discharge pulse calculates and creates the ideal current shape to meet the exact discharge requirements at that precise instant. Eagle PowerTec, in combination with Eagle Power Jump, reduces burn time by up to 50 percent and significantly reduces electrode wear, especially in graphite. A dual 32-bit, PC-based CNC control processes data faster and provides enhanced servo control.

 

Overview and Technical Specifications

Contact us

GANTRY EAGLE 1400

Profitez de la stabilité thermique, de la robustesse et de l’accès périphérique aux surfaces de travail qu’offre la machine d’electroérosion par enfonçage EDM Gantry Eagle 1400. S’alimentant à partir de la toute nouvelle source électrique Eagle PowerTec, elle est munie du premier générateur au monde qui s’adapte au courant. Chacune des impulsions de décharge régule le courant en évaluant et en créant le débit idéal afin de répondre exactement aux besoins électriques du moment. En combinaison avec Eagle Power Jump, la technologie Eagle PowerTec réduit jusqu’à 50 % le temps de combustion et diminue considérablement l’usure des électrodes, et ce, particulièrement pour ceux en graphite. Un système binaire de contrôle CNC de 32 bits exploitable sur PC traite les données plus efficacement et offre une servocommande à rendement amélioré.

 

Overview and Technical Specifications

Contact us

GANTRY EAGLE 2000

Enjoy thermal stability and rigidity plus all-around work area access with the Gantry Eagle 2000 Sinker EDM featuring the all-new Eagle PowerTec power supply with the world’s first Adaptive Current-Shape generator. Each discharge pulse calculates and creates the ideal current shape to meet the exact discharge requirements at that precise instant. Eagle PowerTec, in combination with Eagle Power Jump, reduces burn time by up to 50 percent and significantly reduces  wear, especially in graphite. A dual 32-bit, PC-based CNC control processes data faster and provides enhanced servo control. The Gantry Eagle 2000’s Sinker EDM unique construction and 4-sided drop tank design provide thermal stability and rigidity while allowing work-area access from all sides.

 

Overview and Technical Specifications

Contact us

TITAN I25

Features of the Titan I25 EDM drill include: integrated filtration system with deionizing resin system; small footprint to optimize floor space; stainless work surface for tool mounting; automatic electrode compensation; and predefined cutting technology database.

Overview and Technical Specifications

Contact us

TITAN I40

Features of the EDM Titan I40 drill include: integrated filtration system with deionizing resin system; small footprint to optimize floor space; stainless work surface for tool mounting; automatic electrode compensation; and predefined cutting technology database.

Overview and Technical Specifications

Contact us

TITAN I60

Features of the Titan I60 EDM drill include: integrated filtration system with deionizing resin system; small footprint to optimize floor space; stainless work surface for tool mounting; automatic electrode compensation; and predefined cutting technology database.

Overview and Technical Specifications

Contact us

TITAN FORCE 30

The Titan Force 30 is a CNC small hole drilling machine. This powerful CNC control offers standard G&M code programming as well as canned cycles for easy programming. Features of the Titan Force 30 EDM Drill include: 0.001″ to 0.250″ electrode capacity; 70A peak power supply, fine amperage control; 16″ x 12″ x 16″ axis travel (X, Y, Z); 18″ to 24″ open working height; 1500 lb. weight capacity.

Overview and Technical Specifications

Contact us

TITAN FORCE 60

The Titan Force 60 is a CNC small hole drilling machine. This machine is the big brother of the Titan Force 30, offering the same powerful CNC control with a larger stroke. Features of the Titan Force 60 EDM Drill include: 0.001″ to 0.250″ electrode capacity; 70A peak power supply, fine amperage control; 16″ x 12″ x 16″ X, Y, Z axis travel; 18″ to 24″ open working height; 1500 lb. weight capacity.

Overview and Technical Specifications

Contact us

TITAN FORCE 90

The Titan Force 90 is a CNC small hole EDM drilling machine. This machine is available in 2 different stroke sizes and offers applications requiring rotary tables, indexers and tilting drill heads. The features of the Titan Force 90 EDM drilling machine include: CNC industrial motion control (up to 8 axes); automatic electrode changers/guides for automation; integrated filter/DI system; available in X, Y, Z axis travel: 16″ x 12″ x 16″ and 24″ x 16″ x 16″; complex 6-axis machine available with tilting head and rotary tables: A (tilting head) B (rotary tilting) C (indexing lathe).

Overview and Technical Specifications

Contact us