Spark & Co Logo

OMAX 55100

The largest cantilever-style machine in the series, the Omax Waterjet 55100 JetMachining Center is the industry standard workhorse for high-speed precision machining.

Model:
OMAX
Table size (L x W) :
Average (from 5’ to 12’)
Speed:
100-250”/min
Specifications
Benefits & Features

MACHINE DIMENSIONS

Footprint * – (L x W)
12’ 11” x 7’ 10”
Height **
9’ 10”
Weight (tank empty)
8,000 lb

WORK ENVELOPE

X-Y Cutting Envelope ***
8’ 4” x 4’ 7”
Z-Axis Travel ***
8”
Table Size – (L x W)
10’ 6” x 5’ 5”

STANDARD MODEL SPECIFICATIONS

Speed
180 in/min
Linear Positional Accuracy
±0.0010"
Repeatability
±0.0010"
Ballbar Circularity
±0.0025"
  • Fastest cutting speeds and best precision compared to any competitive abrasive waterjet in the industry
  • Backed by our exclusive IntelliMAX Software with real world cutting data
  • Robust and accurate design for tight tolerance cutting and reliable operation
  • Small, efficient footprint for minimal floorspace utilization
  • Easy operator access to the work area
  • Precision X-Y Axis rigidly mounted to the cutting table
  • Pre-loaded linear bearings and precision ball screws
  • Drive system sealed against water, dirt, and grit
  • No tool changes & minimal fixturing dramatically reduce setup
  • Machines a wide range of materials and thicknesses, from metals and composites to glass and plastics
  • Leaves behind a satin-smooth edge, reducing secondary operations
  • Does not create heat-affected zones or mechanical stresses
  • Environmentally “green” system uses only natural garnet abrasive and water in the cutting process
  • No noxious fumes, liquid or oils used in, or caused by, the machining process
  • Shipped as a completely pre-assembled and factory-tested system
  • Designed and manufactured at the OMAX factory in Kent, Washington, USA
  • Standard programmable Motorized Z-Axiswith a precision OMAX MAXJET 5i Nozzleboosts productivity and process efficiency
  • Standard IntelliCAM software program is available with two tools in one that can generate either 2D or 3D tool paths from 3D models.
  • Standard IntelliVISOR SE System Monitoringoffers predictive maintenance and system monitoring to minimize unexpected downtime
  • Standard patent-pending IntelliTRAX traction drive inside the X-Axis beams fully enclosed inside coated steel covers
  • Standard scissor-style hard plumbing adds another level of safety by using contained high-pressure components, as well as contributes to a smaller footprint, lower maintenance, and higher reliability
  • Standard Rapid Water Level Control for cleaner, safer, and quieter submerged cutting completes most work below 80 dBA
  • Standard 600 lb Bulk Abrasive Delivery System transports garnet from the assembly’s large hopper into the Zero Downtime Hopper located on the Z-Axis
  • Optional DualBRIDGE System can be used to increase machining capability
  • Optional Tilt-A-Jet taper eliminating abrasivejet cutting head
  • Optional Variable Speed Solids Removal System (VS-SRS) designed for industrial use increases uptime through automated solids removal
  • High efficiency EnduroMAX pump system available in 30 hp, 40 hp, 50 hp or 100 hp with operating efficiencies up to 85%
  • EnduroMAX pump technology delivers the highest nozzle horsepower in the industry for faster and more efficient cutting
  • Highly robust and reliable pump design capable of over 1,000 hours between maintenance
en-action

Want to See It in Action?

Request a free test cut!

OMAX 55100

The largest cantilever-style machine in the series, the Omax Waterjet 55100 JetMachining Center is the industry standard workhorse for high-speed precision machining.

The Omax Waterjet 55100 JetMachining Center delivers precisely accurate, multi-axis parts quickly and consistently in almost any material, maximizing machining throughput. Built tough to handle big jobs in a demanding manufacturing environment, it can easily machine almost any material and thicknesses, from steel and titanium to carbon fiber, composites, glass, and more.

With an X-Y cutting envelope of 10’ 6” x 5’ 2” (3,200 mm x 1,575 mm) a maximum cutting speed of 180 inches per minute (4,572 mm/min) and a linear positioning accuracy of +0.0010” (±0.0254 mm), this bridge-style waterjet cutter maximizes profitability through operational efficiency.

With a completely sealed and protected ball screw drive system, the OMAX 55100 is a robust and reliable workhorse for shops using larger stock. From prototyping to full-scale manufacturing, the Omax Waterjet 55100 abrasive waterjet can cut materials up to 4’ x 8’ (1.2 m to 2.4 m) quickly and efficiently.

EnduroMAX® direct drive pump technology, a programmable motorized Z-axis and a durable diamond-integrated MAXJET® 5i nozzle deliver the highest nozzle horsepower in the industry for faster cutting with operating efficiencies of up to 85% and this, with over 1,000 hours between maintenance for increased uptime.

Fast and precise IntelliCAM® software offers simple programming that takes DXF or CAD drawings and quickly creates cutting paths, making the 55100 ideal for short-run part production and just-in-time manufacturing.

Standard Intelli-VISOR® System Monitoring helps you keep on top of scheduled maintenance to keep production high and downtime low.

Operator access and safety is another great feature of the OMAX series abrasive waterjets. An eco-friendly “green” system uses only natural garnet abrasive and water in the cutting process. meaning no noxious fumes, liquid or oils are used in, or caused by, the machining process. Standard scissor-style hard plumbing adds another level of safety by using contained high-pressure components, as well as contributes to a smaller footprint, lower maintenance, and higher reliability.

From small job shops to large production facilities, the OMAX 55100 JetMachining Center reduces cutting times and increases profitability.

Spark & Co. has been a distributor of OMAX waterjet cutting systems (PROTOMAX®GLOBALMAX®MAXIEM® and OMAX® series) for over a decade. No one is better equipped to meet your needs in waterjet, Laser (2D laser & 3D laserTube Laser, EDM (EDM SinkerWire EDMEDM Drill,MillingShaping and Finishing.

For more information : https://www.omax.com/omax-waterjet/55100

Other Machines That Might Interest You

MAXIEM 2040
18’ 0” x 12’ 2”
250-500”/min
OMAX 120X
21’ 8” x 17’ 3”
100-250”/min
OMAX MOBILE JMC
29’ 4” x 21’ 8”
100-250”/min