2D FIBER LASER CUTTING SYSTEMS
HIGH SPEED, EXTREME PRECISION
SUPERIOR EFFICIENCY

SF3015H4

Main Configuration of The Fourth Generation SF3015H

1.Heavy-duty thermally isolated hollow bed

The heavy-duty thermally isolated hollow bed is welded with high-quality steel plates and pipes. After welding, stress relief annealing, secondary aging treatment, and ultra-large gantry milling machine precision processing ensure that the bed has sufficient structural stability and shock resistance. Withstand higher acceleration. There is no connection inside the bed to block heat transfer, avoiding the heat generated by cutting from being transferred to the bed and affecting the processing accuracy. The bed will not be deformed after long-term use, which improves the service life of the equipment.

2.Intelligent surrounding spiral negative pressure dust removal

Intelligent surrounding spiral negative pressure partition dust removal system, according to the current cutting position, intelligently switch the air outlet, time-sharing, partition, and sectional air exhaust, and cooperate with the back-shaped sealing structure design at the bottom of the base to realize smokeless cutting.

3. Gaphite, copper protection(≥8000w)

The thermal conductivity of graphite is poor, which effectively prevents the machine bed from being deformed by heat and guarantees the service life.

4.Strong Aviation Aluminum Beam

The use of aviation-grade high-strength aluminum alloy beams, light weight, low inertia; built-in triangular reinforced structure, strong rigidity, good shock absorption; rough machining after annealing to eliminate internal stress, and fine machining after secondary vibration aging treatment to ensure Improve the overall strength and stability of the beam.

What’s the Industry Application of The Fourth Generation SF3015H Fiber Laser Cutter?

The SF3015H4 fiber laser cutting machine is specialized for sheet metal processing, machinery manufacturing, auto parts manufacturing, electrical manufacturing, elevator manufacturing, petroleum machinery, food machinery, shipbuilding etc.

What does the SF3015H4 High Power Fiber Laser Cutter cut?

Carbon steel, stainless steel, aluminum alloy, brass, copper, galvanized sheet, silicon steel sheet, electrolytic sheet, titanium alloy, manganese alloy, etc.

High Power Fiber Laser Cutter-The Fourth Generation SF3015H

SF1530G

Fully Surrounded Structure

Avoid laser radiation to ensure process safety and compliance with local requirements.

Partitioned Smoke Exhaust System

Locate the cutting position and automatically exhaust the smoke in different areas to make the smoke removal more efficient.

Single Platform and Small Footprint

Unlike others double-platform cutters, the single-platform structure has a smaller footprint.

Pull-out Platform

Convenient for loading and unloading while meeting the needs of conventional sheet metal processing.

Save Cost

No need to disassemble the machine at all, a 20ft container can be done, saving your freight and installation costs.

CNC Cutting System-FSCUT2000

FSCUT2000 is a full-featured open-loop control system specially launched for the sheet metal processing industry. It has the characteristics of stability and reliability, convenient deployment, easy debugging, safe production, rich functions, and excellent performance; it supports and provides modular, personalized, automated, and information-based solutions to realize memory caching, and has a powerful cutting process database for different thicknesses and plates.

5’x10′ | Fiber Laser Cutter for Metal Sheet with Single Table SF1530G

SF6020H

Introduction

H full cover fiber laser cutting machine is a kind of metal sheet cutting fiber laser machine. It has changeable table, the change time is less than 15s.  Cameras are installed inside and outside the machine to ensure the safety during operation. Suitable for cutting medium and thick plates.  This product passed CE/FDA/ETL certifications.

Product Features

5) Laser fully contained in fiber, no need for regular beam alignment

Industry Application

The SF3015H full protection fiber laser cutting machine is specialized for metal processing, electricity, electronics, achitechive, medical devices, and other processing industries.

Application Materials

Carbon Steel, Stainless Steel, Galvanized Steel, Electrolytic Zinc-Coated Steel, Aluminum, Brass, Copper, and other thin metal materials.

https://www.senfenglaserusa.com/product/full-cover-fiber-laser-cutting-machine-for-metal/

SF3015H

Advantages of Space Saver Fiber Laser Cutter SF3015H:

1. Smaller Footprint, Wider Working Area

• The size of the machine is 89.3″*326.7″*92.1″, and the floor space is reduced by 22.2%.
• The whole machine can fit into a 40HQ.
• No need frame container, which saves freight cost.

2. Safe and Stable Operation

• 720° all-round safety inspection, follow up the cutting situation in time.
• Fully protected enclosed, reducing laser damage.

3. High Degree of Automation

• Autofocus Laser Head, improving positioning and cutting accuracy.
• Automatic gas distribution device for auxiliary gas.

Main Configuration of Space Saver Fiber Laser Cutter 6KW:

1. High Strength Machine Bed

• Welded with high-quality steel plates and pipes.
• Annealing to eliminate internal stress
• sufficient structural stability and shock resistance
• Not deformed for a long time

2. Intelligent Surrounding Spiral Negative Pressure Partition Dust Removal System

• Intelligently switchingthe air outlet, time-sharing, partition, and sectional air exhaust
• Cooperating with the back-shaped sealing structure design at the bottom of the base to realize smokeless cutting.

3. Intelligent CNC Operating System

Adopt Cypcut numerical control system. With intelligent diagnosis, multi-threading operation, three-level perforation, laser energy control, adaptive edge-finding, automatic corner acceleration and deceleration, flight cutting, switching worktables, mechanical accuracy compensation and other features.

What’s the Industry Application of Space Saver Fiber Laser Cutter 4KW?

The SF3015H fiber laser cutting machine is specialized for sheet metal processing, machinery manufacturing, auto parts manufacturing, electrical manufacturing, elevator manufacturing, petroleum machinery, food machinery, decorative advertising, etc.

What does the Space Saver Fiber Laser Cutter cut?

Carbon Steel, Stainless Steel, Aluminum Alloy, Brass, Copper, Galvanized Sheet, Silicon Steel Sheet, Electrolytic Sheet, Titanium Alloy, Manganese Alloy, etc.

IPG LaserCube

The IPG LaserCube is available in a power range of 500–6000 watts. Our customers use a wide range of materials, including stainless steel, aluminum, titanium, composites, copper, brass and even silver. The LaserCube is very precise and uses linear motors, with no ball screws or rack and pinions that can wear out. Customers that currently have laser systems tell me they use the LaserCube for all their high-precision, critically-sized parts. IPG is the benchmark for fibre laser quality. We manufacture this equipment in an environment where excellence is the order of the day.

The LaserCube is entirely manufactured by IPG. We also supply fibre resonators to Mitsubishi, Mazak, Bystronics, HK, Cincinnati, and practically everyone else except Trumpf. The resonator is, of course, the essential part of the laser. IPG manufactures this key component, as well as the rest of the machine.

The machines range in price from $255,000 to $365,000, depending on resonator power and other options. Our 2-km laser includes the Power Pierce, which drills at 4 kW and cuts at 2 kW. A tremendous advantage for cleaner, faster drilling. Since IPG manufactures the entire machine, it can sell the resonator part at the same price as if sold to the OEM. You therefore get the power you need at a great price. For example, a 4 Kw LaserCube costs only $295,000, a special price that includes a 2-year usage warranty with no hour limits; the machine itself comes with a 1-year warranty.

LaserCubes can be financed over 60 to 84 months with a single down payment and a one-page credit application. Eligibility requirements are very simple. Chuck Stump is the person in charge at IPG. He’s easy to work with, without any hassle.

Attached please find information about the IPG LaserCube. Delivery takes approximately 60 to 90 days. The machines are manufactured near Boston, Massachusetts, USA. The purchasing process includes an invitation from IPG to come to the production plant to see your machine and sign for it before it’s shipped. Customers really appreciate this opportunity because it’s always interesting to see where a machine is made. You also receive additional training to learn everything about the machine you’re getting before it ships.

The IPG LaserCube comes with an optional vision alignment system. This system is relatively inexpensive (approx. $10,000) and lets you process combinations of parts. For example, in the case of sheets of parts that first go through the turret in forming applications like those for louvres or milling cutters, the LaserCube can make holes or special cuts or cut the outer shape. The LaserCube uses its vision alignment system to detect a hole or other feature in the parts coming out of the turret and then directs the cutting program. The system is very accurate. You can also machine laser parts the same way. It’s sometimes easier to machine and thread a hole on the machining centre, then bring a plate of parts to the LaserCube and cut the outer shape. The system can also separate preprinted metal plates used to make nameplates. The system can be ordered new or refurbished. Listen to the podcast on vision alignment and machine accuracy.

LaserCube podcast at https://lasercube.podbean.com 

For more information, check out: 

https://lasersystems.ipgphotonics.com/Products/lasercube/lasercube